Eurorack Power

Doepfer A-100PSU3 Powersupply

12 V/5V switching supply

Suitable for qualified personnel only because of electrical safety (dangerous mains voltage 100V - 240V)

Dimensions:
ca. 200 x 80 x 40mm12V / 2000mA
-12V / 1200mA
+5V /…

Doepfer A-100BUS4 Busboard with 4 cables

5V Low-Cost Adapter

+5V@100 mA plug-in module; instead of a separate +5V power supply, this module can be plugged into a free socket on the bus board; for modules which require +5V (e.g. A-113, A-190), the current is taken from…

Klavis NoDrain

Negative to +5V converter

Offers up to one amp of precise 5Volts
Takes its power from where you won’t use it: the negative rail
Gives you back the +12V power previously used to make 5V
High efficiency…

A-100BM10: connection cable between module and bus (10-to-16 pin) 20cm length

A-100BM16: connection cable between module and bus (16-to-16 pin) 20cm length

MS A-100-BM1010 10 pins module cable (spare part)

A-100BM1010: connection cable between module and expandermodule (10-to-10 pin) 10cm length

(see pictures)

The A-100 DIY kit #1 is a combination of components that allows the inexpensive do-it-yourself construction of a case for the A-100

- power supply with external transformer (AC output)- because of safety reasons, no dangerous…

The Happy Ending kit includes:

1x set Z-rails 84 HP (silver)

1x set Threaded strips

1x Z-ears table top (silver)

1x uZeus 4HP PSU with 2x flying busboards

1x 1000mA power adapter (230V)

The Happy Ending kit includes:

1x set Z-rails 84 HP (black)

1x set Threaded strips

1x Z-ears table top (black

1x uZeus 4HP PSU (black) with 2x flying busboards

1x 1000mA power adapter (230V)

Doepfer A-100 Bus Board V6 with 22 boxed pin headers with 4 cable

An assembled and tested bus board, 22 sockets, e.g. for customers who want to built their own case and need a bus board for A-100 modules, includes cables for…

Tiptop Audio uZeus 4HP plus 3000 PSU with Flying Bus Board

Tiptop Audio uZeus with 2 Flying Busboards connected.

3000mA PSU included.(230V powercable not included)

Grounded Powercable excluded (Available here)

With this combi:…

uZeus with Flying bus Board is a compact and yet powerful solution for distributing power in small or medium sized modular systems. Works with a wall wart power supply and has integrated "flexible busboards".

The microZEUS system…

uZeus (black) 4HP PSU with flying busboard

uZeus with Flying bus Board is a compact and yet powerful solution for distributing power in small or medium sized modular systems. Works with a wall wart power supply and has integrated…

Separate "flying bus board" for adding further module connectors to your uZeus power distribution.

37cm long cable with two headers for connecting to the uZeus and five headers for connecting Eurorack modules.

Eowave Source d`energie, PSU Module, black

The Source D'Energie is a power supply module designed to power up to a 6U case with +/-12v and 5v rails. Wall wart plugs can be used for a skiff or case with few modules, but for…

Tiptop Audio - uZeus 3000ma boost Adapter (no euro 230v cable included)

Grounded Powercable excluded (Available here)

2 meter powercable here

With this combi: 2000mA +12V, 500mA -12V, 170mA +5V

uzeus user manual

info 3000mA…

Tiptop Audio Zeus Studio System is a power distribution solution for DIY-building of Eurorack cases. It is an active component that is to be connected to a 15V DC switching power supply.

The use of low voltage power supplies and…

TIPTOP AUDIO 4600MA ZEUS STUDIO BUS UNIVERSAL ADAPTERTIPTOP AUDIO CINCON PSU 15V DC, 4.6ABrick type power supply for the Zeus Studio Bus

Input 100-240V AC ~1.5A, secondary voltage 15V DC, 4.6A

2.5mm output socket (center…

The Zeus Access simplifies connecting of a TipTop Audio Zeus Powered Bus Board lot as you don´t have to solder anything.

The Zeus Access contains a 2HP wide faceplate with a 2.5mm barrel socket for the externam power supply* and…

Tiptop Audio Zeus Acces Dual

Zeus Access Dual provides simple, fast and cost effective solution for linking up to 6 Zeus Studio Bus boards with 2 Cincon-TTA brick-style power supplies for monsterous eurorack systems.

It is a…

Tiptop Audio Zeus Passive Busboard

The ZEUS Passive Bus Board is used to distribute power to modules coming from either the generation of ZEUS Powered Bus Board, uZEUS or any other power supply available from other manufacturers.…

4ms row Power 40 Module, with Power Brick 90W and Micky Mouse 230V Power cable included!

The clean and regulated power solution Row Power 40 offers 40W of power, 1.5A@+12V, 1.25A@-12V. It is a good choice for medium systems (e.g.…

4ms Flying bus pair

Two cables with 7 male connectors each (total 13 connectors)

Flying Bus (male pin) are passive power distribution cables that work with the Row Power to distribute power to your modules. Can be daisy-chained…

Doepfer A-100PSU2 +/-12V/1200mA 230V (while stock last)

12 V Power supply II

assembled and tested power supply +/-12V@ 1200mA with ring core transformer, 230V version, does not include cables, mains inlet, power switch, fuse and…

In the UK there different wall outlets than for instance the Netherlands.

You can adapt powersupplies with this AC adapter for UK

Cable for connecting multiple Trigger Riot modules

Doepfer single transformer for A-100DIY1 (15V AC / 2,5A)

Same as the one from the diy kit

Schuko Powercable Male - Micky Mouse 230V, 200 cm

Straight connector - straight connecotor

(for example 4MS powerbrick)

Schuko Powercable Schuko Male, right-angled, 200cm

Doepfer A-183-9 Quad USB Power Supply

Module A-183-9 is a simple power supply for up to four devices which can be powered via USB (e.g. keyboards, smartphones). An LED shows is the +5V are present.
The module has no USB function…

Schuko Stroomkabel Schuko Male 200cm

Deze 10 A stroomverlengkabel met Schuko-connector is geschikt voor het verbinden van apparaten die aangesloten zijn op netspanning,

Connectordesign - kant ARecht
Connectordesign - kant…

A-100B84P2

back panel 85 HP with mains inlet and mounting holes for 12V PSU II and III, version 2 (screwed version of the mains inlet, with power supply cover), made of 2 mm anodized aluminium

3U/84HP with mounting holes for 12V…

4ms Barrel Cable Long

2.1mm barrel plug. Longer barrel to barrel cable for daisy-chaining Row Powers. Cable is 10" long, suitable for connecting Row Powers across an entire 3U (for example connecting a Double Modular Row 6U to…

4ms Barrel Cable short

2.1mm barrel plug. Short barrel to barrel cable for daisy-chaining Row Powers. Cable is 4" long, suitable for connection two adjacent Modular Rows that are directly connected or separated by a 30 or 45…

Doepfer A-197-3 RGB LED Controller

Module A-197-3 is a control unit for RGB LED stripes.

The LED stripe is glued e.g. to the inner edges of the cases A-100P6/P9/PMS6/PMS9/PMS12 to illuminate the modules and patching statically…

Intellijel/meanwell 90 Watt (GSM90A15-P1M)

∙ For Intellijel TPS80W and 80W 7U Performance case power supplies.
∙ Uses 2.5mm x 5.5mm barrel connector.
∙ 90 Watt AC-DC power supply with universal AC input range.

Optional…