Black Eurorack Modules

Tiptop Audio - ZDSP Black version

CV-Digital Singal Processor

Tiptop Audio’s Z-DSP is a cartridge-based open source digital sound processing and effects generating platform for your modular synthesizer. Lush audio processing,…

RYK Modular - M185 Sequencer

The M185 sequencer was originally designed for the Roland 100m system and was the model for Intellijel's Metropolis sequencer. A new version with exciting features is now available directly from the…

Tiptop Audio Fold Processor

The Tiptop Audio Fold Processor is a voltage controlled wave multiplier and sub-octave generator. The circuit is based on a classic diode design that adds odd harmonics by folding the incoming signal,…

VERMONA MODULAR MELODICER

The MeloDICER is Vermona's vision of a sequencer with the perfect balance between stochastic and deterministic creation of rhythm and melody. Its algorithms generate random values that magically turn…

Make Noise X-Pan

X-PAN is a compact and powerful 5 channel Voltage Controlled Stereo Mixer with Low Noise and High Headroom allowing for creation of complex panoramic audio imagery in just 10hp.

X-PAN is highly responsive to…

(In Doepfer Bag, no box)

Doepfer A-155v (black vintage edition)

Analog and Trigger Sequencer, 2 rows of 8 steps with knobs and 2 rows of 8 steps switches

Features of the analog rows (knobs):

∙ 8 potentiometers (knobs)
∙…

(In Doepfer Bag, no box)

Doepfer A-154v Sequencer Controller (vintage black edition)

Module A-154 is a supplement to the A-155 Analog/Trigger Sequencer module. It offers a lot of new features that are not available in the basic…

Qu-Bit Electronix Octone (black)

Octone is a sequencer designed with the creation of music in mind. Tonality, rhythm, and rests are all built into this powerful module.The pitch output can be quantized to one of the pre-defined…

Make Noise Pressure Points

Pressure Points is a controller module, an analog sequencer that is played by hand. Touching the gold plated copper wires (aka Touch Plates), you become part of the circuit, generating a gate signal…

2hp - Avert - Black

AVert is a dual attenuverter. Each channel offers the ability to attenuate and invert any input signal. The signal present at channel 1 is normalled to channel 2, allowing for two unique output signals from a…

2hp - Euclid - black

Euclid - Euclidean gate sequencer

Euclid is a rhythmic pattern generator based on ideas originally presented by Euclid, the Greek mathematician. The Euclidean algorithm can be adapted to create rhythms by…

Special Price While stock lasts..

Moog Music Mother-32 (Eurorack & semi modular)

Unscrew the 8 screws, put a 10-16p euorack flatcable to the right connector and you have your Eurorack Mother-32! We will put the right Eurorack…

AJH-Synth Minimod Sonic XV black

The Sonic XV Eurorack module is a four pole Diode Ladder Filter, featuring the circuitry and sound of the Musonics Sonic V synthesiser, which has a quite different character from transistor ladder…

4ms - SMR Faceplate - Black

DIY replacement faceplate for the Spectral Multiband Resonator. Black background with white artwork.
No soldering required. Includes replacement light pipes.Please note: This black panel is available…

MiniMod VCO (black) VINTAGE TRANSISTOR CORE VCO

The discrete transistor core of this Voltage Controlled Oscillator is an exact emulation of the original and now very rare R A Moog Model D Oscillator from 45 years ago, and the…

(In Doepfer Bag, no box)

Doepfer A-110-1V (vintage black edition) Standard VCO

Module A-110-1 is a voltage-controlled oscillator. This VCO's frequency range is about eight octaves (ca. 15Hz ... 8kHz). It can produce four…

(In Doepfer Bag, no box)

Doepfer A-110-2V (vintage black edition) Basic VCO

Module A-110-2 is a low-cost voltage-controlled oscillator. It's a slightly reduced version of the standard VCO A-110-1. Compared to the A-110-1 the…

(In Doepfer Bag, no box)

Doepfer A-112V Sampler / Wavetable Module (vintage black)

Module A-112 is the combination of a voltage controlled 8 Bit Sampler and a wavetable oscillator. On top of it the module is able to generate…

4ms - STS Faceplate - Black

DIY replacement faceplate for the Stereo Triggered Sampler. Black background with white artwork.
No soldering required.Please note: This black panel is available for the Stereo Triggered Sampler only…

(In Doepfer Bag, no box)

Doepfer A-118V Noise / Random (vintage black)

Module A-118 is (as you might have guessed) a noise and random voltage generator. It produces three types of signal: white noise, colored noise, and random…

Roland SYSTEM-1m - PLUG-OUT Synthesizer

Semi-Modular PLUG-OUT Synthesizer with CV/GATE and Eurorack Compatibility

The SYSTEM-1m is a semi-modular synthesizer with PLUG-OUT capability and a unique design that can be used as a…

Roland System-500 512 DUAL VCO

The 512 Dual VCO (voltage controlled oscillator) is a single module consisting of two voltage controlled oscillators. Each independent VCO produces frequencies across a wide range with 1V/octave…

2hp - Delay - black

Delay is a flexible, full-featured delay audio processor. CV over all parameters provides dynamic access to its nuanced controls. The feedback path ranges from slapback to infinity, allowing for wild…

2hp - Freez - black

Freez is a voltage controlled locked looper. It captures moments of audio in buffers, where they can be minced and mangled beyond recognition. Once frozen, adjusting size will cause pitch and timbre changes to…

2hp - Hat - Black

Hat is a hi-hat cymbal with a wild side. Finding something unique is easy with a blend of sounds ranging from robotic to metallic. At its core are three unique sound sources made up of six oscillators, a noise…

2hp - LFO Black (LFO with morphable waveforms)

Low frequency oscillator with smooth morphing between sine, triangle, sawtooth, and square waveforms. Four alternative waveforms accessible including stepped triangle, FM sine, ramp,…

2hp - Mix - black

Mix is a 4 channel mixer that is great for audio or control voltage signals. Up to four inputs can be combined to a single output each with its own level control.

Download the Mix manual here

∙ DC coupled…

2hp - Snare - Black

Snare goes from short blips to 909 hits and everywhere in between. More than just a typical snare sound, this module is a powerful sound design tool that encourages exploration. 1V/Octave tracking allows…

2hp - Switch Black

Switch is a voltage controlled signal router that is great for audio and CV signals. With four inputs and one output, it is ideal for dynamically moving between four disparate elements.

The active channel can…

2hp - TM - black

TM is a probabilistic random sequence generator based on the research of Alan Turing. His Turing machine was a mathematical model of computation that could, in theory, create any output based on a set of…

2hp - VCA Black

The 2hp VCA is a dual, linear VCA. It uses the renowned 2164 SSM architecture, giving it extremely low distortion and high quality audio outputs. With a CV input attenuator, and DC-coupled inputs this is your new…

4ms - DLD Faceplate - Black

DIY replacement faceplate for the Dual Looping Delay. Black background with white artwork.
No soldering required.Please note: This black panel is available for the Dual Looping Delay only as a DIY…

4ms - PEG Faceplate - Black

DIY replacement faceplate for the Pingable Envelope Generator. Black background with white artwork.
No soldering required.Please note: This black panel is available for the Pingable Envelope Generator…

4ms - QCD Exp Faceplate - Black

DIY replacement faceplate for the QCD Expander. Black background with white artwork.
No soldering required.Please note: This black panel is available for the QCD Expander only as a DIY project.…

4ms - QCD Faceplate - Black

DIY replacement faceplate for the Quad Clock Distributor. Black background with white artwork.
No soldering required.Please note: This black panel is available for the Quad Clock Distributor only as a…

4ms - QPLFO Faceplate - Black

DIY replacement faceplate for the Quad Pingable LFO. Black background with white artwork.
No soldering required.Please note: This black panel is available for the Quad Pingable LFO only as a DIY…

4ms - RCDBO Faceplate - Black

DIY replacement faceplate for the Rotating Clock Divider Break Out. Black background with white artwork.
No soldering required.Please note: This black panel is available for the Rotating Clock…

4ms - SCM Faceplate - Black

DIY replacement faceplate for the Shuffling Clock Multiplier. Black background with white artwork.
No soldering required.Please note: This black panel is available for the Shuffling Clock Multiplier…

4ms - SCMBO Faceplate - Black

DIY replacement faceplate for the Shuffling Clock Multiplier Break Out. Black background with white artwork.
No soldering required.Please note: This black panel is available for the Shuffling Clock…

4ms - SISM Faceplate - Black

SISM Faceplate - Black

DIY replacement faceplate for the Shifting Inverting Signal Mingler. Black background with white artwork.
No soldering required.Please note: This black panel is available for…

4ms - Tapographic Faceplate - Black

DIY replacement faceplate for the Tapographic Delay. Black background with white artwork.
Soldering required.Please note: This black panel is available for the Tapographic Delay only as a DIY…

4ms - VCAM Faceplate - Black

DIY replacement faceplate for the VCA Matrix. Black background with white artwork.
No soldering required.Please note: This black panel is available for the VCA Matrix only as a DIY project. Basic…

4ms - WAV Rec Faceplate - Black

DIY replacement faceplate for the WAV Recorder. Black background with white artwork.
No soldering required.Please note: This black panel is available for the WAV Recorder only as a DIY project.…

4ms row Power 40 Module, with Power Brick 90W and Micky Mouse 230V Power cable included!

The clean and regulated power solution Row Power 40 offers 40W of power, 1.5A@+12V, 1.25A@-12V. It is a good choice for medium systems (e.g.…

AJH - Gemini 2412 Dual SVF black

This module comprises two fully featured, and beautiful sounding 12db multimode filters, based around the classic vintage SEM filters. Each individual filter has LP, BP and HP outputs, along with…

AJH MEGA-PHASE 12 BLACKhis is based on the vintage EH Smallstone phaser - which was 4 stages. So all of the JMJarre style Equinoxe sounds are readily available.
However, it has been expanded to 12 stages, with some unique features…

AJH MiniMod Gain Switch Expander and Multiple black

2HP

AJH MiniMod Ring SM black

The RING SM module is quite unique because its ring modulator circuit is based on a discrete transistor AC coupled Gilbert Cell design dating back to the early 1960's. The overload and distortion…

AJH V-Scale variable Buffer black

This is a precision active buffer and multi which has outstanding performance, it features very high input impedance, very low output impedance and an offset voltage of

AJH-SYNTH - Finazlizer black

The Finaliser R-EQ Reverb, EQ and Maximiser module:Perfect for adding that final touch to a modular patch, the AJHSynth Finaliser R-EQ module includes seven Mono / Stereo reverb types, along with a…

MiniMod Dual Contour (black) DUAL CONTOUR GENERATORS

Two independant Contour Envelope Generators in a single 12hp wide Eurorack module. These are very accurate replicas of the Model D contour generators, with identical circuitry…

MiniMod Glide + Noise (black) GLIDE, HOLD & NOISE

There is a lot of power and funtion contained within this deceptively small 6hp module. It features both the Glide and the Noise generator circuitry from the vintage Model D…

MiniMod VCA (black) DISCRETE CASCADED VCA

The MiniMod Discrete Cascaded VCA is a 10hp wide Eurorack format module. It features two fully discrete transistor VCA cores which are hardwired in series.

There are two audio inputs…

MiniMod VCF (black) TRANSISTOR LADDER FILTER

The stuff of legends, the Moog transistor ladder filter changed the face of the musical landscape forever. The MiniMod VCF is a faithful replica of the 24db/octave low pass filter used…

Doepfer A-100KBK Knob black (white stripe)

Rotary Knobs, diameter 15 mm, height 15 mm, for 6 mm axis with 18 teeth, in different colors

Doepfer A-100kv (vintage knob, black)

A-100KV, same knob as used in the modules of the Vintage Edition (e.g. A-110-2), black body with 2 white dots and metal disk at the top side

Knob black glossy with silver-metallic coverplate…

Doepfer A-100LC1V Low Cost Case Vintage Vers. 100-240V

The A-100LC1V is very similar to the A-100LC3v but offers only 48 HP for installation of modules. A-100LC3v is equipped with the power supply A-100SSB.
The case is made of…

Doepfer A-100LCBv Low Cost Base with PSU3 Vintage Edition

Two rows with 84 HP for installation of modules

Same as the A-100LCBsw case but painted vintage black like the A-100 Minicase black

The A-100 Low Cost Base has the same…

(In Doepfer Bag, no box)

Doepfer A-114v Dual ringmod. Vintage Edtion (black)

Module A-114 contains two separate ring modulators. A ring modulator outputs the product (Multiplication X • Y) of the signals at inputs X and Y.…

(In Doepfer Bag, no box)

Doepfer A-120v 24dB Low Pass Vintage Edition (black)

Module A-120 is a voltage controlled low-pass filter, which filters out the higher parts of the sound spectrum, and lets lower frequencies pass…

Doepfer A-121-2V Multi mode filter (vintage black

Module A-121 is a voltage-controlled multi-mode filter with a cut-off slope of -12 dB / octave. Four simultaneous outputs are available, each with different characteristics:…

Doepfer A-124 SE Wasp Filter (Black & Yellow special edition)

Module A-124 is a special 12dB multimode filter using the "strange" filter circuit of the "EDP Wasp" (an analog synthesizer with black/yellow case built end of the…

Doepfer A-132-3v Vintage Edition

Module A-132-3 is composed of two identical voltage controlled amplifiers (VCA).

Each VCA has a manual gain control and a control voltage input with attenuator. The character of the control scale…

(In Doepfer Bag, no box)

Doepfer A-138aV Mixer linear (vintage black)

Module A-138 is a four channel mixer, which can be used with either control voltages or audio signals. Each of the four inputs has an attenuator, and there's…

Doepfer A-138bV Vintage black edition

Module A-138 is a four channel mixer, which can be used with either control voltages or audio signals. Each of the four inputs has an attenuator, and there's a master attenuator, so that the…

Doepfer A-138ov (output module) Vintage black

The output module of the Performance Mixer system sums all conencted input modules and their channels, controls the final volume as well as separately the aux send and aux return…

Doepfer A-138pv Performance mixer (black vintage)

The A-138p input module of the Performance Mixer system has four channels featuring controls for gain, aux send, panorama and output level as well as a mute switch and a peak-LED…

Doepfer A-138sv Mini Stereo Mixer (vintage black)

A-138s is a simple but useful 4-in-2 mixing tool.

It has four inputs available. Each input is equipped with an attenuator (Level) and a panning control that is used to distribute…

Doepfer A-140v Vintage Edition

Module A-140 is an envelope generator, and, since it puts out control voltages, counts as one of the modulation devices in a modular system. As soon as the gate input receives sufficient voltage,…

(In Doepfer Bag, no box)

Doepfer A-147-2V (vintage black edition) Voltage Controlled Delayed Low Frequency Oscillator / VCDLFO

Module A-147-2 is the successor of the VCLFO A-147 but offers much more features than the…

Doepfer A-148v Dual Sample&Hold / Track&Hold (black vintage editon)

Module A-148 (Dual S/H) has two identical sample and hold modules, designed to produce 'staircase' voltages.

The signal present at the sample input is sampled…

Module A-150V Vintage black (Dual VCS) contains two separate voltage-controlled switches.

Each switch has a control voltage input, a common Out / Input, and two In / Outputs. The switches are bi-directional: they can work in both…

Module A-151V Vintage black (Quad Sequential Switch) is like an electronic four-position rotary switch.
It includes trigger and reset inputs, four in / outputs, and a common out / input. Each time a pulse is received at the…

Doepfer A-156V Dual Quantizer Vintage Edition (black)

Module A-156 is a Dual Control Voltage Quantizer.

A quantizer converts a continous control voltage in the range 0...+10V into a stepped output voltage in the same voltage…

(In Doepfer Bag, no box)

Doepfer A-160-5 Vintage Edition

Module A-160-5 is a voltage controlled clock multiplier. The incoming clock signal (socket Clock In) is multiplied by a factor that depends upon the control voltage on…

(In Doepfer Bag, no box)

Doepfer A-170V Dual Slew Limiter (vintage black edition)

Module A-170 contains two separate slew limiters, also known as portamento controllers or integrators. The first SL has just one joint control,…

Module A-171-2V (vintage black) is a voltage controlled slew limiter with a lot of additional features beyond a simple slew limiter. It's mostly a licensed copy of Ken Stones VCS which is in turn based on the Serge VCS.

These are…

(In Doepfer Bag, no box)

Doepfer A-180-2V (vintage black edition)

Modules A-180-1 and A-180-2 are simple multi-connectors. They have eight inter-connected sockets, so that you can "multiply" any audio or control signal. From the…

Doepfer A-185-2V Precision CV Adder (vintage black)

Module A-185-2 is a precision control voltage adder/buffer. Precision means that the amplification of the inputs without attenuators is exactly 1.00 and is suitable to add…

(In Doepfer Bag, no box)

Doepfer A-188-1A Vintage Edition BBD 512 Stages

Module A-188-1 is a so-called Bucket Brigade Device module.

BBDs have been used to delay audio signals before digital delays dethroned the BBD based…

(In Doepfer Bag, no box)

Doepfer A-188-1X Vintage Edition BBD 128 Stages

Module A-188-1 is a so-called Bucket Brigade Device module.

BBDs have been used to delay audio signals before digital delays dethroned the BBD based…

Doepfer A-190-3V Black vintage midi interface

Module A-190-3 is a Midi/USB-to-CV/Gate interface that allows the integration of the A-100 system into a USB or Midi environment. It has available 4 analog control voltage outputs…

Eowave Source d`energie, PSU Module, black

The Source D'Energie is a power supply module designed to power up to a 6U case with +/-12v and 5v rails. Wall wart plugs can be used for a skiff or case with few modules, but for…

Eowave Swing

The Swing module is simple, but an effective addition to analog sequencers. Swing is a voltage-controlled clock delay with three modes, which can be used to provide step sequencers with a swing factor.

Swing…

Expert Sleepers FH-1 'faderHost' USB MIDI Host

(latest firmware, version 1.5)

FHX-1 expander for the FH-1 here

The FH-1 'faderHost' is a USB MIDI Host in an 8HP Eurorack module, allowing you to directly connect a USB MIDI…

Make Noise 10HP blank

Black colored pcb material with logo's

(design can be changed)

Make Noise 1HP blank

Black colored pcb material with logo's

(design can e changed)

Make Noise 20HP blank (Lightning Bolt)

Black colored pcb material with logo's

(design can be changed)

Make Noise 4 HP blank

Black colored pcb material with logo's

(design can be changed)

Make Noise 6 HP blank

Black colored pcb material with logo's

(design can be changed)

Make Noise Multiple / Gate combinerMultipleThe Multiple is a simple but important module that allows for sending a signal to multiple destinations. Within the Make Noise system the Multiple may also be used for combining clock,…

Meng Qi Dual Stereo Volume

The Dual Stereo Volume is a passive dual stereo attenuator controller module which uses high quality Alps Stereo potentiometers. The most obvious use would be as an audio output module or as a…

Roland BITRAZER

Modular Crusher

Programmable Crusher Effect with CV/Gate and Eurorack Compatibility

BITRAZER is a unique modular effect combining intense bit and sample rate crushing effects and unprecedented control and…

Roland System-500 530 DUAL VCA

The 530 Dual VCA (voltage controlled Amplifier) features two independent voltage controlled amplifiers for controlling the loudness of audio signals. Each VCA has three sliders for an audio input…

Roland TORCIDO
Modular DistortionProgrammable Classic Distortion with CV/Gate and Eurorack Compatibility

TORCIDO is a versatile modular effect combining classic Roland distortion sound and unprecedented control and flexibility.…

The Happy Ending kit includes:

1x set Z-rails 84 HP (black)

1x set Threaded strips

1x Z-ears table top (black

1x uZeus 4HP PSU (black) with 2x flying busboards

1x 1000mA power adapter (230V)

Verbos Electronics Multiple

The Verbos Electronics Multiple is a passive 2x4 multiples in only 3HP.

As all pulse outputs on Verbos modules are "floating diode" you can use a passive multiple also as a boolean OR logic component.…

Vermona Modular qMI 2 – Quad MIDI Interface

Vermona´s second Eurorack module is a very flexible yet affordable MIDI/CV interface which can be up to four voice polyphonic. You can use it as four independent interfaces or in a…

Vermona Modular twinOut

Beside spectacular sound-engines and -shapers, conventional and uncommon sources and modulators of control voltages, a modular synthesizer also needs a choice of modules to handle the daily routine.…

Vermona Modular VCDrive

A cultivated portion of dirt for your modular system

VCDrive is a voltage controlled distortion module suited for all kind of signals within your modular system.

The large sonic spectrum of VCDrive…

4ms - Pod20 Powered (4ms powerbrick 45W included) (Please, check first the depth of your modules!!)

( micky-mouse-powercable excluded! Keep in mind the depth of your modules!)

Low-cost, portable, compact enclosure that turns…

4ms - Pod26 Powered (4ms powerbrick 45W included) (Please, check first the depth of your modules!!)

Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

( 230V micky-mouse-powercable…

4ms- Pod60 Powered (4ms powerbrick 45W included) (Please, check first the depth of your modules!!)

Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

(230V micky-mouse-powercable…

Talldog - µClouds SE (uClouds, microClouds) Eurorack [Rev C]

Black version

8HP Eurorack module | Granular audio processor

μClouds SE is a granular audio processor that creates textures and soundscapes by combining multiple…

Roland SYSTEM-500 510 SYNTH

With the SYS-510, designing your first modular setup or integrating classic Roland sound into your existing modular rig has never been easier. Based on the vintage SYSTEM-100m's 110 VCO, VCF, and VCA…

Endorphin.es BLCK Shuttle Control (Black)

Shuttle Control is a 16-channel MIDI/CV interface which can recieve USB-MIDI at a number of inputs simultaneously. For instance control signals from a tablet/PC/Mac at the "to device…

2hp - Vowel (Black)

Vowel is a speech synthesis and formant oscillator. It synthesizes and approximates the human voice by generating vowel sounds. These can be manipulated to provide deep low baritones, or high pitched squeaks.…

2hp - Pluck

Pluck is a physical modeling synth voice. It uses the Karplus-Strong algorithm to create plucked string sounds. The dampening control sets the size of the string and allows for dramatic timbral shifts.

The decay…

Qu-Bit Electronix - Mixology (black)

Mixology takes the mixing and routing of modular audio signals to a new level of sophistication. It is a stereo, four channel mixer with a performance oriented interface. Each channel has a…

DOEPFER BLIND PANEL 2HP VINTAGE

Doepfer Blind Panel 4HP Vintage black

Doepfer Blind Panel 8HP Vintage black

Ground Control is a 42 hp Eurorack performance sequencer. (with latest firmware V2.0 / AUG-2023)

The sequencer has 4 tracks: three melodic tracks and a drum track consisting of 8 drum triggers and modulation/accent output. There…

Doepfer A-101-1v Vactrol Multitype Filter (vintage)

This is the first vactrol based module in the A-100 system. A vactrol is a combination of a light depending resistor (LDR) and a LED (light emitting diode) both put into a small…

A-101-2v is a vactrol based combination of Low Pass filter (LP) and VCA and was inspired by the Buchla module 292. The term "Low Pass Gate" was created by Don Buchla and stands for a module that can be switched between low pass…

Doepfer A-111-2v High end VCO II

The successor of the A-111 High End oscillator is an utterly precise analog VCO/LFO with a extremely big frequency range, immaculate tracking over at least ten octaves and nearly perfect…